How to Take the Curve: Driving Examples for Outside the City
Filed Under : Travel by Ethan Melandri
Nov.1,2009Custom Search for Hotels Best Deals
When the weather is warm and the sun shining, there is no better feeling than going for a pleasant drive in the countryside. The fresh air and scenery certainly beat the normal daily commute and if you are keen driver you can enjoy the performance of your car within the legal limits on relatively uncongested roads.
When driving on country roads there is a danger- the tightening radius bend that is well known for creating several accidents. On a normal corner the radius will remain the same as you make the turn, thus you will leave the steering in the same position. With curves the tightening radius bend may vary, thus you have to change the steering lock as you move further into the curve.
The typical example of a crash caused by a tightening radius bend is a when the driver turns into a corner at a speed they think suitable for the conditions and corner type, but mid way through the bend significantly tightens.
To try and stay on the road, the driver may change the wheel or steering lock, and unfortunately the speed is usually too much. This causes the car to be under steered. The driver may fight this feeling by hitting the brakes, which will worsen the condition. In this situation the vehicle will hit traffic coming down the other lane or it may wind up in a ditch.
The problem is further compounded on country roads because hedges, bushes, or trees can obscure a drivers site regarding a bend. Therefore they are unprepared for the change in the corner and danger ensues.
If you do not want to be the next crash statistic, you will want to use clues that you can see to determine how a curve may change. This will help you brake or change gears before entering the corner to a more appropriate speed.
When you cannot view the curve check for telephone poles or light posts, which can signify a change in the road is about to occur. When driving at night using an oncoming cars light beams can work as a guide. You want to enter any bend at a speed you can safely stop with to ensure you do not unbalance your vehicle.
Once the bend starts to open out again and you can see clearly ahead you can begin to accelerate. Remember driving in the countryside holds other hazards for unsuspecting drivers, like slippery mud on the road, slow moving tractors and errant livestock. So always think “what if” when deciding on the appropriate speed for a bend.
You can leave a response, or trackback from your own site.
Tags :